Maintenance Magnet

Gen3 Tundra 3.4L

Service checklist & specs companion for the magnet QR. Universal Gen3 2022–2026 · 2WD & 4WD · gas 3.4L.

Helpful, not authoritative. This page is meant to help, but it isn’t the final word. Spot an error? Please let us know and we’ll correct it.
Verify before you wrench. Numbers below are a quick-ref for the Maintenance Magnet. Confirm every torque, capacity, interval, and part against your owner’s manual and VIN before service. The magnet is not a substitute for the FSM or dealer guidance. Many rows are still marked Unverified pending an owner’s-manual check.

Torque

Wheels, oil change, diffs / transfer case, and transmission. Gen3 uses one spin-on oil filter for both 2WD and 4WD.

Wheels

SpecValueSource
Lug nuts — OEM aluminum97 ft-lbS5 WhatSizeBolt Unverified — confirm OM
Lug nuts — OEM steel154 ft-lbS5 WhatSizeBolt Unverified — confirm OM
Lug socket / thread22 mm · M14×1.5S9 TorqueSpec Unverified — confirm OM

Oil change

SpecValueSource
Oil drain plug30 ft-lb · 14 mmS4 EngineOilDB (torque); socket per magnet / field confirm Unverified — confirm OM
Oil filter (spin-on, 2WD & 4WD)13 ft-lbMagnet / field; Gen3 OEM 90915-YZZN3 spin-on both drives (not Gen2 cartridge) Unverified — confirm OM
Skid plate21 ft-lb · 12 mm bolts / 10 mm clipsS1 Owner’s manual / field confirm Unverified — confirm OM

Diffs / transfer case

SpecValueSource
Front diff fill/drain29 ft-lb · 10 mm hexS1 Owner’s manual Unverified — confirm OM
Rear diff fill/drain36 ft-lb · 24 mmS1 Owner’s manual Unverified — confirm OM
Transfer case18 ft-lb · 3/8″ squareS1 Owner’s manual Unverified — confirm OM

Transmission (10-spd)

SpecValueSource
Drain plug30 ft-lb · 6 mm hexS1 Owner’s manual Unverified — confirm OM
Fill plug30 ft-lb · 14 mmS1 Owner’s manual Unverified — confirm OM

Brake torque & grease

Mounts listed at 151 ft-lb per William / Gen3 community DIY. Conflicting figures exist — read the source notes.

Torque

SpecValueSource
Front caliper mount151 ft-lb · 19 mmGen3 community DIY (e.g. tundras.com 2022+ thread) — FSM-cited DIY posts, not a scanned FSM page. Magnet uses 151 per William. Conflicting refs exist (Repairius ~137; Gen2.5 / some FSM extracts ~133). Confirm FSM / VIN
Rear caliper mount151 ft-lb · 19 mmSame Gen3 community DIY as front; William confirmed for magnet. Some threads cite much lower rear values for pin/guide bolts — do not confuse mount vs slide-pin. Confirm FSM / VIN
Slide / guide pins~25–55 ft-lb · 14 mmSources vary — confirm against FSM for your year. Magnet note: “confirm — sources vary.”

Grease

SpecValueSource
Pad backsSilicone / ceramic, thin filmStandard brake-service practice (magnet)
Slide pinsHigh-temp silicone greaseStandard brake-service practice (magnet)
Clips / pad earsLight filmStandard brake-service practice (magnet)
Never greaseFriction material or rotor faceMagnet safety note

Fluids

Capacities and grades for gas 3.4L Gen3.

SpecValueSource
Engine oil (w/ filter)7.7 qt · 0W-20 (ILSAC GF-6A)S2 Lemon Manuals Unverified — confirm OM
Front differential1.36 qt · 75W-85 GL-5 (Toyota LT)S3 toyota-club.net Unverified — confirm OM
Rear differential5.7 qt · 75W-85 GL-5 (Toyota LT)S2 Lemon Manuals Unverified — confirm OM
Transfer case2.17 qt · ATF WSS2 Lemon Manuals Unverified — confirm OM
Transmission (ref. capacity)11.7 qt · ATF WSS2 Lemon Manuals Unverified — confirm OM
Engine coolant13.1 qt · Toyota SLLCS2 Lemon Manuals Unverified — confirm OM
Brake fluidDOT 3S7 MyAutoLog Unverified — confirm OM

Parts / filters

OEM part numbers for Gen3 3.4L. Oil filter is the same spin-on for 2WD and 4WD.

SpecValueSource
Oil filter (2WD & 4WD spin-on)90915-YZZN3OEM Gen3 spin-on (also 90915-10010). Same part for 2WD and 4WD — not a Gen2 cartridge. Confirm VIN. Unverified — confirm OM
Drain plug gasket90430-12031OEM crush washer; replace each oil change
Engine air filter17801-F4010 ×2S6 Frontier Toyota Unverified — confirm OM
Cabin air filter87139-0C010 ×1S7 MyAutoLog Unverified — confirm OM
Spark plugs90919-01295 ×6S8 Yota Garage (supersedes 90919-A1006 / DENSO 3523) Unverified — confirm OM

Service intervals

Severe-use oil at 5k is what the magnet highlights (*). Confirm in the Warranty & Maintenance Guide for your model year.

SpecValueSource
Oil & filter — severe5,000 mi / 6 moS7 MyAutoLog Unverified — confirm OM
Oil & filter — normal10,000 mi / 12 moS7 MyAutoLog Unverified — confirm OM
Tire rotation5,000 miS7 MyAutoLog Unverified — confirm OM
Cabin air filter15,000 mi / 12 moS7 MyAutoLog Unverified — confirm OM
Engine air filter30,000 miS7 MyAutoLog Unverified — confirm OM
Spark plugs40,000 miS8 Yota Garage Unverified — confirm OM
Coolant — first change100,000 mi / 120 moS7 MyAutoLog Unverified — confirm OM
Brake fluid36 monthsS7 MyAutoLog Unverified — confirm OM

Inspection notes

Gen3 driveline notes from the magnet checklist.

SpecValueSource
U-jointsSealed — no grease zerks; inspect driveline bootsGen3 design / magnet inspection note
Prop-shaft boltsCheck / re-torque on scheduleMagnet inspection note — confirm OM torque
Brakes & tiresPads, rotors, tread, pressureMagnet inspection note
Fluids & lightsLevels, leaks, all lampsMagnet inspection note

Sources

IDs match the COW Auto Tundra Gen3 Service Specs Sheet (Specs + Sources tabs). Sheet Verified column is currently Unverified for these rows.

  1. S1 — Toyota owner’s manual (2025 Tundra; source of truth — to be checked). No public URL.
  2. S2 — Lemon Manuals — 2025 Tundra 3.4L Fluids
  3. S3 — toyota-club.net — Tundra 70 fluids & capacities
  4. S4 — EngineOilDB — 2025 Tundra oil
  5. S5 — WhatSizeBolt — 2025 Tundra lug torque
  6. S6 — Frontier Toyota — air filter 17801-F4010
  7. S7 — MyAutoLog — 3rd-gen Tundra maintenance schedule
  8. S8 — The Yota Garage — OEM spark plug 90919-01295
  9. S9 — TorqueSpec — Tundra lug nuts
  10. Brake mounts — Gen3 community DIY (e.g. tundras.com); magnet uses 151 ft-lb per William. Not a scanned FSM page.

Common services — how-to videos

Curated Gen3 (2022–2026) DIY links. We’ll turn these into a COW Auto YouTube playlist once the channel is ready — until then, this page is the playlist.

Not affiliated with Toyota. Videos are third-party DIY unless marked Official Toyota. Always follow torque and safety guidance for your exact VIN.

Amazon parts shopping list

Parts matching the Maintenance Magnet. As an Amazon Associate, COW Auto earns from qualifying purchases.

Shop parts on Amazon

Upgrades

Optional performance parts for Gen3 Tundra — not required for the Maintenance Magnet schedule.

  • K&N cold air intake — 63-9042

    K&N AirCharger cold air kit for 2022–2026 Tundra / 2023–2026 Sequoia gas 3.4L twin-turbo (i-FORCE V35A). Fits gas models; verify year/engine on the listing (hybrid fitment differs). Not CARB-legal for street use in California.

    K&N 63-9042 Cold Air Intake (ASIN B0CX1ZTZZF)

As an Amazon Associate, COW Auto earns from qualifying purchases. Prices and sellers change — confirm fitment by VIN before checkout. Not affiliated with Toyota Motor Corporation.